QSC E110 無源喇叭 passive speaker

Product Details

The E110 is a compact, two-way loudspeaker with a 10-inch, die cast frame woofer with a 2.5-inch voice-coil housed in a multi-purpose enclosure that’s at home in stage monitor or main PA deployment. It incorporates QSC’s DMT (Directivity Matched Transition) design with a wide 85° coverage. When used as a stage monitor, the E110 is angled up at a 55° angle allowing it to be placed near the performer when used on a crowded stage.

E Series loudspeakers will perform very well with any quality, professional power amplifier – but by taking advantage of the complete E Series Entertainment System, more performance and options are available. Today’s powered loudspeakers rely on finely tuned digital signal processing (DSP) to achieve a higher level of performance. When used with QSC GXD or PLD amplifiers or with a QSC TouchMix digital mixer, E Series loudspeakers can also take advantage of advanced DSP. QSC has developed E Series DSP settings for all three platforms. These settings support a variety of applications including live sound reinforcement (with and without subwoofers), stage monitoring, dance music and karaoke.

Features

High output, professional quality sound with 300 W continuous power
E Series Entertainment System – Advanced digital signal processing tunings and options using QSC GXD, PLD amplifiers or TouchMix digital mixers.
E Series Entertainment System DSP Tunings are now available for PLD, CXD and GXD processing amplifiers:
- For PLD/CXD visit Amplifier Navigator Software
- For GXD visit the GXD Firmware Updater
Rugged tour-grade textured paint
Foam-lined perforated steel grill
Suitable for main PA and stage monitor
Available U-Style Yoke and M8 rigging kit for permanent installation
Dual angle pole socket

Model	E110
Configuration	1 x 10-inch, 2-way, non-powered
Frequency Response (-6 dB)	68Hz – 20kHz
Frequency Range (-10 dB)	50Hz - 20kHz
Power capacity²: continuous/peak	300 W / 1200 W
Sensitivity	95 dB, 1 W @ 1 m
Coverage Angle	85° conical DMT
Output1 (Peak SPL @ 1m)	126 dB
Drivers LF HF	254 mm (10-inch) driver with 64 mm (2.5-inch) voice coil; 25 mm (1-inch) exit, 45 mm (1.75-inch) voice coil, compression driver
Nominal Impedance	8Ω
Cross-over	Full-range only, 1.8 kHz
Input Connections	2 x NL4, 1 x barrier strip
Enclosure	Multi-angle plywood, black texture paint finish. One top-mounted handle. Perforated, powder-coated steel grille with foam lining.
Mounting and suspension	9 x M8 suspension points, dual angle, 35 mm pole-socket
Net weight	20kg / 44lbs
Shipping weight	23kg / 50lbs
Dimensions (WxHxD)	330 x 560 x 330 mm 13 x 22 x 13-inch

1 With QSC Processing
2 Power that the device can withstand for two hours without permanent change in acoustical, mechanical, or electrical characteristics, greater than 10%, using IEC60268 noise based on nominal impedance in the cabinet with Xover, full range 30 Hz 12 dB/oct.

*Preliminary specifications are subject to change.