Audio Technica AT871UG (Unidirectional Condenser Boundary Microphone)

SKU 00574
HK$0.00
In stock
1
Share this product with your friends
Audio Technica AT871UG (Unidirectional Condenser Boundary Microphone)
Product Details
Brand: Audio Technica

    • Designed for surface-mount applications such as high-quality sound reinforcement, professional recording, television, conferencing and other demanding sound pickup situations.
    • UniGuardTM RFI-shielding technology offers outstanding rejection of radio frequency interference(RFI).
    • Superior off-axis rejection for maximum gain before feedback.
    • Small-diameter UniPoint capsule near boundary eliminates phase distortion and delivers clear, high-output performance.
    • Heavy die-cast case and non-silp silicon foam bottom pads minimize coupling of surface vibration to the microphone.
    • Low-profile design with low-reflectance finish for minimum visibility.
    • AT871UG has contained electronics eliminate need for external power module.
    • The AT871UG requires 9V to 52V phantom power for operation only.
    AT871UG Specifications
    Element
    Fixed-charge back plate, permanently polarized condenser
    Polar Pattern
    Half-cardioid (cardioid in hemisphere above mounting surface)
    Frequency Response
    30-20,000 Hz
    Open Circuit Sensitivity
    -34 dB(19.9mV) re 1V at 1Pa
    Impedance
    200 ohms
    Maximum Input Sound Level
    133 dB SPL (1KHz,THD 1%)
    Dynamic Range (Typical)
    103 dB, 1 kHz at Max SPL
    Signal-To-Noise Ratio
    67 dB, 1 kHz at 1Pa
    Phantom Power Requirements
    415 g
    Dimensions
    17.0mm x 145.0mm x 120.0mm (H x W x D)
    Angle
    120°
    Cable
    7.6m long, 3.2mm diameter, 2-conductor shielded cable with TA3F-type connector and XLRM-type connectors.
    Accessories Furnished
    Soft protective pouch

     

    • 設計在平面放置應用,提供高品質收音、會議、專業錄音、及其他高要求的收音應用。
    • UniGuard™ – 射頻干擾(RFI)屏敝技術,提供傑出的防止射頻干擾能力,避免收音時受到如手提電話等的干擾。
    • 半球形單一指向性,可抑制後方雜音而清楚地在前方收音。
    • 細小的UniPoint系列收音頭,可消除反射式相位失真,並提供清晰及高信號的音頻輸出。
    • 平放不顯眼的設計,並塗上低反光的顏色塗料。
    • 以壓模鑄造的堅固外殼及咪高峰底部的防滑矽泡棉,可減低桌面震動對咪高峰的影響。
    • 平放不顯眼的設計,並塗上低反光的顏色塗料。
    • AT871UG 內置咪高峰前置放大器供電元件,無需使用外置供電模組。
    • AT871UG 咪高峰只作直流9V 至52V 幻象供電操作。
    元件
    固定充電背板,靜電型電容式
    指向性
    半球形心形單指向性
    頻率響應
    30-20,000 Hz
    開通靈敏度
    -34 dB (19.9 mV) 以 1V 於 1 Pa
    阻抗
    200 歐姆
    最大輸入聲壓級
    133 dB, 1 kHz 於 1% T.H.D.
    動態範圍 (一般)
    103 dB, 1 kHz 於最高聲壓
    訊噪比
    67 dB, 1 kHz 於 1Pa
    幻象供電
    415 克
    尺寸
    17.0mm x 145.0mm x 120.0mm (高度 x 長度 x 闊度)
    收音角度
    120°
    導綫
    7.6m 長,3.2 mm 直徑連接線,2 芯線連遮罩電線,以TA3F插頭連接及3針卡農公頭插頭。
    隨機附件
    保護袋