Shure KSM44MP 大振膜 可切換 指向 電容式 咪高峰
Product Details
SHURE KSM44MP 配備可選擇的指向性（心形、全指向和雙指向），以時尚的雙振膜設計提供無與倫比的多功能性。精密設計的 1 吋振膜膠囊帶來自然清晰的音質及溫和的高頻提升，增強細微細節同時保持平滑。這款麥克風非常適合現代製作風格，包括空靈的聲音質感、微妙的泛音和細膩的樂器表現。
雙振膜結構穩定靈敏度和指向性的一致性，提升低頻的離軸控制，帶來更純淨的多麥克風混錄效果。隨附的避震架和防噴罩可隔離麥克風的震動與低頻噪音，並阻隔爆破音。
此外包含高級收納盒、硬式支架及螺紋轉接器，構成完整配件組合。
產品介紹
- 可選指向性：心形、全指向與雙指向
- 平坦頻率響應，帶有細微高頻強調
- 優化指向一致性與低頻阻隔
- 超低自噪音
- 時尚現代設計
- 防震架、磁性防噴罩及高級配件套件
- 適用於人聲、鋼琴、立體聲錄音技術、遠距收音及合奏
本購買包括:
- 1 KSM44MP Dual Diaphragm Multi-Pattern Condenser Microphone
- 1 Shock Mount
- 1 Magnetic Pop Filter
- 1 Premium Zippered Carrying Case
- 1 Swivel-Mount Mic Clamp (Hard Mount)
- 1 Set Replacement Shock Mount Bands (8)
- 1 Threaded Adapter
Type
- Condenser (externally biased)
Output Impedance
- 47 Ω +/- 5
Sensitivity
open circuit voltage @ 1 kHz, typical
| Pattern | Value |
|---|---|
| Cardioid | -30 dBV/Pa[1] |
| Omnidirectional | -35 dBV/Pa[1] |
| Bidirectional | -35 dBV/Pa[1] |
Signal-to-Noise Ratio
| Pattern | Value |
|---|---|
| Cardioid | 89 dB |
| Omnidirectional | 87 dB |
| Bidirectional | 86 dB |
Max SPL
1 kHz at 1% THD
| Pad | Load | Value |
|---|---|---|
| No Pad | 1000 Ω | 130 dB SPL |
| 2500 Ω | 135 dB SPL | |
| 5000 Ω | 135 dB SPL | |
| With 15 dB Pad | 1000 Ω | 145 dB SPL |
| 2500 Ω | 150 dB SPL | |
| 5000 Ω | 150 dB SPL |
Dynamic Range
@ 1 kHz (No Pad)
| Pattern | Load | Value |
|---|---|---|
| Cardioid | 1000 Ω | 126 dB |
| 2500 Ω | 130 dB | |
| 5000 Ω | 130 dB | |
| Omnidirectional | 1000 Ω | 123 dB |
| 2500 Ω | 128 dB | |
| 5000 Ω | 128 dB | |
| Bidirectional | 1000 Ω | 121 dB |
| 2500 Ω | 126 dB | |
| 5000 Ω | 126 dB |
Clipping Level
@ 1kHz, 1% THD
| Load | Value |
|---|---|
| 1000 Ω | 5.1 dBV |
| 2500 Ω | 9.3 dBV |
| 5000 Ω | 9.4 dBV |
Self-Noise
equivalent SPL, A-weighted, typical
| Pattern | Value |
|---|---|
| Cardioid | 5 dBA |
| Omnidirectional | 7 dBA |
| Bidirectional | 8 dBA |
Common Mode Rejection
- 20 Hz – 20 kHz: >60 dB
Attenuator Switch
-
- 0 , -15 dB
Low-Frequency Filter Switch
-
- Flat, –6 dB/octave below 115 Hz, or –18 dB/octave below 80 Hz
Polarity
- Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3
Connector
- Three-pin professional audio (XLR), male
Dimensions
- 47.6 x 171.1 mm (1.87 x 6.74 in.)
Weight
- 295 g
Housing
- Machined, anodized aluminum alloy
Power Requirements
- 48 V DC phantom power (5.9 mA), IEC 61938, P48